Site icon Top & Best Reviews

Best Plunge Router Reviews with Buying Guide

Best Plunge Router Reviews with Buying Guide

When choosing a new woodworking tool, like a plunge router, it can be tough to figure out which one would work best for your specific needs. With all of the choices available in the market, we’re going to cut through the confusion and review eight of the most powerful and best plunge routers currently on sale right now. including budget-friendly options, as well as high-end. we assuming you know about your needs and jumping right into the product review. If not then please read the buying guide available at the bottom of this article.

Before we start, we should know the best plunge routers typically have at least one electronic variable speed setting, a rotating turret with multiple positions for the bit, and a power switch that prevents accidental start-ups in your workshop. The best features of these tools include soft grips to reduce hand fatigue over time and an ergonomic shape. A quick-release lever is also handy when you need to swap bits quickly or remove one without using pliers.

A Plunge router will allow you more control than its fixed base counterpart because it allows you to adjust how deep into wood trimming can be done – down to the exact depth needed on any project.
This guide will review the eight best plunge routers available in the market…

List of 8 Best Plunge Routers

ImagePlunge Routers SpecificationsRating and availability
Brand: Dewalt
Model: DW625
Wattage: 750 Watts.
speed: 8,000 to 20,000 RPM.
Collet Size: 1/2″ & 1/4″ 0-70 mm.
Weight: 11.2 lbs.
Horsepower: 3 HP.
5 Out of 5
Amazon
Brand: Bosch
Model: 1617EVS
speed: 8,000 to 25,000 RPM.
Collet Size: 1/4”, 3/8”, 1/2”, 8mm.
Horsepower: ‎2 1/4 HP.
4.9 Out of 5
Amazon
Brand: Makita
Model: RT0701CX7
speed: 10,000 to 30,000 RPM
Collet Size: 1/4″
Weight: 3.9 lbs. (router only)
Horsepower: 1-1/4 HP
4.9 Out of 5
Amazon
Brand: Makita
Model: RP2301FC
speed: 9,000 – 22,000 RPM.
Collet Size: 12 mm or 1/2″.
Weight: 13.4 lbs.
Horsepower: 3-1/4 HP.
4.8 Out of 5
Amazon
Brand: Dewalt
Model: DW616PK
speed: 24,500 RPM.
Collet Size: 1/2″ & 1/4″.
Depth Control: 1/64″.
Weight: 10.0 LBS.
Horsepower: 1-3/4 HP.
4.8 Out of 5
Amazon
Brand: Festool
Model: 574692
Wattage: 1400W
speed: 10,000 – 22,500 RPM
Collet Size: 1/4″, OF 1400 EQ, 8 mm, 1/2″
Weight: 9.92 lbs
4.9 Out of 5
Amazon
Brand: Triton
Model: TRA001
Wattage: 2400W
speed: 8,000 to 21,000 RPM
Collet Size: 1/2″ & 1/4″
Weight: 14.33 lbs
Horsepower: 3 1/4 HP
4.7 Out of 5
Amazon
Brand: Hitachi
Model: KM12VC
speed: 8,000 to 24,000 RPM
Noise Level: 79.5dB
Collet Size: 1/2″ & 1/4″
Weight: 9.9 lbs
Horsepower: 2-1/4 HP
4.9 Out of 5
Amazon

Dewalt DW625 Plunge router

Rating: 5 out of 5.

Specifications:

  •  Power Source: Corded-electric.
  • Voltage: 120 Volts.
  • Wattage: 750 Watts.
  • speed: 8,000 to 20,000 RPM.
  • Collet Size: 1/2″ & 1/4″ 0-70 mm.
  • Weight: 11.2 lbs.
  • Horsepower: 3 HP.

The Dewalt DW625 Plunge Router is a powerful tool with many features that make it a great addition to any workshop. The DW625 has 3 horsepower of torque which provides smooth work and less gloss. The router has a variable speed motor that can be adjusted from 8,000 to 20,000 RPM for precise control.

An easy on/off push button is located in the handle. Including a powerful 750 watt motor and a collet made of industrial-grade metal. The precision collet accepts a wide range of bits with sizes from 1/2″ to 1/4″. Other features include an interchangeable base for different applications and adjustments that allow depth control for ease while working.

Comes with an interchangeable base that can be used as a plunge router or fixed base, plus there are adjustments so depth control is easier. These features help improve the accuracy of your cuts in different applications. For example, if you have two projects where one needs large chases while another requires shallow ones; this would be ideal for such jobs because the DW625 can adjust.


Bosch 1617EVS Plunge router

Rating: 5 out of 5.

Specifications:

  •  Power Source: Corded-electric.
  • Voltage: 120 Volts.
  • speed: 8,000 to 25,000 RPM.
  • Collet Size: 1/4”, 3/8”, 1/2”, 8mm.
  • Horsepower: ‎2 1/4 HP.

The Bosch 1617EVS Plunge router is a powerful, microfine adjustable speed router. It includes an 8,000-25,000 RPM variable speed dial that allows you to set the optimal speed for different applications. The Constant Response circuitry stabilizes start-up torque and gives you consistent performance. The MicroFine bit depth adjustment feature lets you set your bits’ cutting depths by 1/64 inch at a time.

This Bosch 1617EVS Plunge Router is the ultimate solution for your plunge routing needs. This router features a fixed base that has threaded holes for mounting to a router table positioned in the common 3-hole pattern, and it comes with a RA1161 fixed base with a system for adjusting bit height from above a router table. The rugged carrying case has compartments for all included items. With the dust-sealed power switch, you can work longer without worrying about dust and debris getting on your workpiece or tool.


Makita RT0701CX7 Plunge router

Rating: 5 out of 5.

Specifications:

  •  Power Source: Corded-electric.
  • Voltage: 120 Volts.
  • speed: 10,000 to 30,000 RPM
  • Collet Size: 1/4″
  • Weight: 3.9 lbs. (router only)
  • Horsepower: 1-1/4 HP

The Makita RT0701CX7 plunge router is perfect for any job. It can perform at 1 to 1/4 HP and has a variable speed control dial that goes from 10,000 to 30,000 RPMs so you have the power needed even in tight spaces.

This high-quality machine also features an ergonomic design with a quick-release cam lock system for easy depth adjustments of up to 3 inches deep and base removal installation. while maintaining constant speeds under load! The fixed base includes industry-standard template guides which will ensure your project turns out just as it should be every time too. Last but not least (I’m sorry I couldn’t help myself), this powerful piece has a bright orange finish making it easily visible when working.


Makita RP2301FC Plunge router

Rating: 4.5 out of 5.

Specifications:

  • Power Source: Corded-electric.
  • Voltage: 120 Volts.
  • speed: 9,000 – 22,000 RPM.
  • Collet Size: 12 mm or 1/2″.
  • Weight: 13.4 lbs.
  • Horsepower: 3-1/4 HP.

The Makita RP2301FC Plunge Router is a plunge router with variable speed control that delivers 22,000 RPM with a powerful 3-1/4HP motor for faster cutting. The oversized ball bearing construction helps to extend the life of the tool and ensures smooth operation.

The ergonomic rubberized handles have built-in large two-finger switches for added control and ease of use while routing. A shaft lock allows for quick and easy bit changes, while an integrated dust blower clears away debris from the workpiece surface. A convenient template guide system allows for quick installation and removal. This plunge router also has an easy-to-adjust depth stop with a locking function, which allows you to set your desired depth quickly without having to make multiple passes on the workpiece.


Dewalt DW616PK Plunge router

Rating: 4.5 out of 5.

Specifications:

  • Power Source: Corded-electric.
  • Voltage: 120 Volts.
  • speed: 24,500 RPM.
  • Collet Size: 1/2″ & 1/4″.
  • Depth Control: 1/64″.
  • Weight: 10.0 LBS.
  • Horsepower: 1-3/4 HP.

The Dewalt DW616PK Plunge Router is a high-performance router that’s designed for professional woodworkers and contractors. It features a powerful 1-3/4 HP motor, soft start, variable speed control, micro-fine depth adjustment, and much more! It has an 11 Amp motor with electronic feedback for smooth operation. The plunge base allows you to quickly change the depth of the cut without removing the tool from the workpiece.

The quick-release lever lets you remove and install bits faster than ever before. This router also includes two bases, one fixed and one plunge base, along with multiple collets (1/2″ &1/4″). Most user feedback for the DW616PK was mostly positive, but there were some complaints about the turret. Some users complained that the bottom of the stop interfered with a screw/washer in the center of the turret and as such could not be used on two lower positions.


Festool 574692 Plunge router

Rating: 5 out of 5.

Specifications:

  • Power Source: Corded-electric.
  • Voltage: 120 Volts.
  • Wattage: 1400W
  • speed: 10,000 – 22,500 RPM
  • Collet Size: 1/4″, OF 1400 EQ, 8 mm, 1/2″
  • Weight: 9.92 lbs

The Festool OF 1400 EQ plunge router is a high-performance, professional-grade tool with many innovative features. With its power rating of 1400W a powerful 1.4 HP motor and collet for use with bits up to 8 mm in diameter.

The ergonomic handle with soft grips provides excellent control, even when working in tight spaces. The Festool 574692 Plunge Router can be used with edge forming bits, maximizing chip and dust extraction even around curves and corners. While the micro-adjustability dial allows routing with tremendous precision; depth control to 1/256″ (1/10 mm) with ball detents. Festool 574692 Plunge Router is designed to provide accurate cuts and superior edge forming capabilities when used with the FS Guide Rail System or MFS multi-routing templates. This product is highly recommended for the person who does not have time to deal with intricate woodworking projects but still wants to create something that looks great.


Triton TRA001 Plunge router

Rating: 4.5 out of 5.

Specifications:

  • Power Source: Corded-electric.
  • Voltage: 120 Volts.
  • Wattage: 2400W
  • speed: 8,000 to 21,000 RPM
  • Collet Size: 1/2″ & 1/4″
  • Weight: 14.33 lbs
  • Horsepower: 3 1/4 HP

The Triton TRA001 has a powerful 3-1/4 hp motor that can handle any workpiece with an 8,000-21,000 RPM. The 3-stage turret enables precision preset cut depths, and the single button switch from plunge to a fixed base router provides easy bit change on automatic spindle lock. Soft start and variable speed let you select just the right speeds for your cutting tools like never before!

The Micro Winder is the perfect tool for those who love to work with wood. It can plunge deep into your projects without any problems, and it has a safety switch that locks in place when you’re changing bits so nothing gets damaged! The multi-function fence allows unparalleled control over handheld use or circle cutting. Best of all, there’s an automatic spindle lock that engages only when the power button is closed – this ensures maximum protection from cut zone while table mounted using a router table.


Hitachi KM12VC Plunge router

Rating: 5 out of 5.

Specifications:

  • Power Source: Corded-electric.
  • Voltage: 120 Volts.
  • speed: 8,000 to 24,000 RPM
  • Noise Level: 79.5dB
  • Collet Size: 1/2″ & 1/4″
  • Weight: 9.9 lbs
  • Horsepower: 2-1/4 HP

The KM12VC Router Kit is the perfect solution for anyone who needs a versatile and reliable router. With its two-stage motor release clamp, it lets you make quick changes on both bases with ease using just one tool. And switching from either base to another takes no more than seconds!

Hitachi’s KM12VC Router Kit is an 11-amp motor with 2.25 peak horsepower and nickel-plated housing that makes your cutting precise every time! The adjustable no-load speed from 8,000 to 24,000 RPM allows for the perfect setting, just dial in the right tool for the job while their electronic speed control maintains constant RPM as you adjust how much pressure there is on it. Not only does the KM12VC’s motor have enough power to cut through hardwood, but it is also quieter than any other in its class, just 79.5dB. Less noise means less vibration during operation so, this kit will give you precise cuts every time!

Hitachi designed the KM12VC to be both comfortable and portable. For comfort, it features ergonomic handles which allow for control, accuracy, and precision of use. Portability is also accommodated with its fixed-base weighing only 7.3 pounds while the plunge base weighs 9.9 pounds.
Both easily fitting within an included protective case that allows easy travel between job sites. so you don’t have to worry about your tool kit are lost or damaged in transit!


Why should you buy a plunge router?

The plunge router is the ultimate power tool for a wide variety of woodworking tasks. It features variable height adjustment, so you can set it to any depth that will suit your needs and work on various thicknesses without having to adjust anything else. The motor housing always springs back up onto its posts unless locked in place with an easy-to-reach lever switch, which makes precision cutting much easier than ever before.

Buying Guide – what to look for in a plunge router

It is always a good idea to know what you are getting when you make any purchase. You can find plunge routers at many different stores, but they all have their unique features and benefits. This plunge router buying guide will help you identify the important factors in any plunge router before deciding.


Fixed base router vs plunge router

Plunge routers are your go-to for making detailed cuts in the middle of a workpiece. Fixed base routers, on the other hand, excel at small trims and have more precision when it comes to edge cutting. As such they’re perfect for joining projects together!

If you’re looking to repeat the same precise cut on different pieces, a fixed base router is your best bet. You’ll need to set up the desired depth and let it run until you decide otherwise – this means stopping the machine while adjusting. For those who are looking for an adjustable option with continuous power (while still maintaining precision), then using a plunge router would be ideal since adjustments can be made without having to stop cutting altogether

The benefits of both routers make them great tools in any woodworker’s arsenal; but if consistency is important when working across multiple projects, go for one that will maintain height rather than adjust mid-cut

A router may be a small and lightweight handheld tool, but the size and weight do matter. Fixed routers are compact enough to make them easy to handle for the user; plunge routers have much heftier design factors that can take more effort to maneuver around due to their bulkiness.


Reviews of various types and brands of plunge routers, including Dremel, Bosch, Makita, and Ryobi!

A plunge router is a woodworking tool that cuts or shapes the surface of a piece of stock. It can be used to make rabbets, dadoes, and grooves and cut out decorative moldings and make inlays. The size will vary depending on the type of work you are going to do with it. There are many different brands available for purchase, including Dremel, Bosch, Makita, Ryobi! We have reviews for each one detailing their features and benefits so you can find the best option for your needs!

Final Verdict

It may seem daunting to find the best plunge router for your needs, but we’ve got you covered. Our team of experts has put together a list of our favorite picks and from that information, you should be able to make an informed decision about what’s right for you. We hope this guide has helped narrow down your options so that you can get back to work on creating beautiful woodworking projects!